EJoy Uni Pro User Guide

Still wondering how to start your creation with EJoy Uni Pro? Welcome to our novice village and unveil its mask!

Installation of Desktop Mic Stand

The mic can be fixed on the desktop mic stand with the 5/8 threaded hole of shock mount.

Installation of Boom Arm

Clamp the stand base of boom arm to the desktop.

Connect the boom arm to the stand base.

Connect the mic shock-mount to the boom arm and adjust the angle of mic.

Wired Mode

Connected the mic with smartphone/computer through USB-C cable and related audio cable/adapter.

*Please purchase USB-Lightning cables/adapters support OTG function by yourself when connected with lightning port devices.

Wireless Mode

Long press the power switch to turn mic on, then connect the receiver with mobile phone, tablet or computer. The mic can connect with the wireless receiver automatically.

*Please purchase USB-Lightning cables/adapters support OTG function by yourself when connected with lightning port devices.

The mic and receiver are paired by default. If you need to do a manual repair, please long press the two pairing keys of mic to enter pairing status, and connect the receiver to a device to enter wireless state. At this time, the Microphone Status Indicator Light is flashing blue. After successful pairing,the Microphone Status Indicator Light keeps on blue. Blue light blinks slowly indicates that the receiver is not connected, please check the receiver status.